APC 4xx/5xx/6xx Ankersmid Peltier cooler type APC 4xx/5xx/6xx
Application
The coolers have the function of lowering the gas dew point to prevent condensation in the analyzer.
A good and stable dew point to prevent cross-sensitivity among different H 2 O
The dew point is adjustable between 1 ° C and 15 ° C.
The digital control has several options and outputs, such as mA output, RS 485 and Modbus communication with digital inputs.
This Peltier gas cooler have extra powerful peltier elements and instead of a traditional aluminum heat sink, a superconducting forced heat, so it can deliver much more power than the conventional Peltier coolers.
Description
This cooler has recently entered the market and has incorporated all the innovations and techniques that we need for a highly accurate, precise, safe and sustainable cooler to ensure stable measurement. The unique cooling principle with our patented technology ensures a low and constant dew point of 4 ° Celsius, which for a stable and reliable measurement. The cooler can be easily adapted to various types of heat exchangers
The cooler compensates for variations in the gasflow and varying ambient temperatures.
The extremely low resolution is obtained by the new cooler and the patented heat exchanger technology. The design of the heat exchanger for a so-called shock effect of the cooling gas minimises the contact time between the condensate and the gas. Therefore low SO2 standard can be measured without additives and the like.
The heat exchangers are easy to exchanges and to clean.
The cooler is electronic controlled. The signals can be connected to an electronic console, such as our ADSs, which the other gasconditioneringscomponenten can be read.
Obviously, the cooler is also equipped with conventional NO alarm contacts.
- Special removable heat exchangers, which also can be easily developed
- Humidified heat exchangers for calibration to eliminate cross-sensitivity
- Digitally controlled allowing a very stable dew point arises. ± 0.1 ° C
- Ambient to 45 ° C!!
- Alarm contact
- Optional digital communications Modbus / RS485
- Power 115 to 230 VAC
|
Model APC
|
APC 4xx
|
APC 5xx
|
APC 6xx
|
|
Aantal warmtewisselaars
|
1
|
2
|
1
|
|
Behuizing
|
RVS, wandmontage
|
|
Afmetingen (HxLxD)
|
180 x 280 x 180mm
|
|
|
|
|
Data per warmtewisselaar
|
APC 4x1/5x1/6x1
|
APC 4x2/5x2/6x2
|
APC 4x3/5x3/6x3
|
|
Maximale doorstroming
|
1x 150Nl/h max.
|
2x 150Nl/h max.
|
1x 350Nl/h max.
|
|
Materiaal warmtewisselaar
|
Duran® Glas, PTFE
|
PVDF, PTFE
|
SS316
|
|
Maximum druk
|
3 bar a
|
3 bar a
|
10 bar a
|
|
Dood volume
|
35 cm³
|
35 cm³
|
100 cm³
|
|
Sample gas ingang
|
1x G1/4”i
|
1x G1/4”i
|
1x G1/4”i
|
|
Sample gas uitgang
|
1x G1/4”i
|
1x G1/4”i
|
2x G1/4”i
|
|
Condensaat uitgang
|
1x GL25
|
1x 3/8”i
|
1x G3/8”i
|
|
|
|
Operation data
|
APC 4xx
|
APC 5xx
|
APC 6xx
|
|
Gas ingang dauwpunt
|
Max. 65°C*
|
|
Gas ingang temperatuur
|
Max. 190°C*
|
|
Gas uitgang dauwpunt
|
+1°C ..... +15°C, fabrieksinstelling: +4°C
|
|
Stabiliteit
|
0,1°C bij 20°C omgevingstemperatuur
|
|
Omgevingstemperatuur
|
+5°C tot 45°C
|
|
|
|
Electrical data general
|
APC 4xx
|
APC 5xx
|
APC 6xx
|
|
|
Alarm contact
|
Vrij programmeerbaar contact 1NO / 1NC, vermogen: 250V, 16A AC
|
|
Beschermingsklasse
|
IP20 EN 60529 / EN 61010
|
|
Vermogen:
|
75W
|
|
|
|
Model APC
|
APC 40x
|
APC 50x
|
APC 60x
|
|
Voeding
|
230VAC, 50/60Hz
|
|
|
|
|
Model APC
|
APC 41x
|
APC 51x
|
APC 61x
|
|
Voeding
|
115VAC, 50/60Hz
|
Maximum values in technical data’s must be rated in consideration of total cooling capacity at 25°C ambient temperature and 4°C outlet dew point
PTFE = Polytetrafluoroethylene (Teflon®)
PVDF = Polyvinylidenfluoride
|